Heat Protection Function - Silvercrest SKF 2800 B3 Operating Instructions Manual

Heat protection function

In a case of overheating, the heat protection function switches the appliance off .
This can happen if there is no, or not sufficient, oil or fat in the deep fat fryer or
when solid cooking fats are being melted in the appliance .
When using solid cooking fats, the control and heating element 5 cannot give
off the heat that is generated quickly enough .
If the heat protection function has switched the appliance off, please proceed as
follows:
1) Allow the appliance to cool down .
2) Leave the oil or fat to cool (the fat should just be liquid) .
3) Open the appliance lid r by pressing the lid release button 6 .
4) Remove the frying basket 3 .
5) Remove the operating/heating element 5 .
6) Place the operating/heating element 5 in a clean and dry location .
7) Carefully press the reset button t on the control and heating element 5
with a small pointed object .
The appliance can now be used again .
SKF 2800 B3 GB │ IE │ NI │ CY │ 19 ■