Quick Start Function; Setting The Cooking Time And Temperature Manually - Silvercrest SHFD 1400 B2 Operating Instructions Manual

6) Press the On/Off button
You will hear a beep.
The control symbols in the lower section of the control panel 1 light
up. The display z shows the preset temperature
time
You can now either select the quick start function, start a cooking process
with a manually set cooking time and temperature or use one of the pre-
set frying programmes. Read the following section for more information.
NOTE
The cooking process can only start if the pan 7 and the frying
►
basket 2 are correctly clicked into place.

7.1 Quick start function

If you do not need to make any further setting, you can use the quick start
function and start the cooking process immediately. To do this, press the
Start/Stop button
at the preset temperature
min. The fan symbol
You can adjust the cooking time and temperature at any time, as
described in the next section.

7.2 Setting the cooking time and temperature manually

When the appliance is switched on, the buttons in the lower section
of the control panel 1 are active and illuminated. You can adjust the
temperature and cooking time to your needs at any time, even when
a frying programme is running. Proceed as follows:
1) Use the
cooking time is shown on the display z.
2) Press the
the
–
You can increase or reduce the temperature between 80°C
and 200°C in steps of 5°C.
–
You can increase or decrease the cooking time between 1 and
60 minutes in 1-minute increments.
–
You will hear a beep each time a button is pressed.
SHFD 1400 B2
min alternately.
p to start frying immediately. The appliance works
°C and for the preset cooking time of
q flashes during cooking.
button s, to select whether the temperature or the
button o to decrease the displayed values or press
button a to increase them:
i, to switch on the control panel 1.
°C and cooking
GB │ IE │ 13 ■