Before First Use - Silvercrest SHFD 1400 B2 Operating Instructions Manual

5. Before first use
Before using the hot air fryer for the first time, clean all components as
described in the section Cleaning and care.
RISK OF FIRE
Hot air flows out of the ventilation slits 0 on the back of the appliance.
Never cover the ventilation slits.
►
Do not place the appliance directly under wall units, wall sockets
►
or near curtains, paper or easily inflammable materials.
Make sure to leave enough free space around the appliance so
►
that the air can circulate well.
1) Place the appliance on a horizontal, level, stable and heat-resistant
surface.
NOTE
If you wish to place the hot air fryer below the cooker extraction
►
hood, make sure that the cooker is switched off.
2) Insert the mains plug into a mains wall socket. Ensure that the mains
socket is always within easy reach while the appliance is in operation.
All the symbols on the control panel 1 light up briefly and you will
hear 2 short beeps.
The On/Off button
now ready for use and is in standby mode.
NOTE
During first use, you may notice a small amount of smoke and a
►
slight odour. This is due to production residue. This is completely
normal and harmless. Ensure sufficient ventilation; for example, by
opening a window.
│ GB │ IE
■ 10
i lights up permanently. The appliance is
SHFD 1400 B2