P3: Basic PLC program for SINUMERIK 840D sl
13.16 Basic conditions and NC VAR selector
● Archiving of utility routines
– Allocation of the output states of individual blocks
– Comparison of blocks
– Rewiring
– STEP 5 → STEP 7 converter
● Option packages
– Programming in S7-HIGRAPH, S7-GRAPH, SCL.
– Additional packages for configuration modules (e.g. CP3425 → NCM package)
13.16.1.2
SIMATIC documentation required
ReferenceS:
● System description SIMATIC S7
● S7-300 instruction list
● Programming with STEP 7
● User Manual STEP 7
● Programming manual STEP 7; designing of user programs
● Reference manual STEP 7; Instructions list AWL
● Reference manual STEP 7; Ladder Diagram KOP
● Reference manual STEP 7; Default and system functions
● Manual STEP 7; Conversion of STEP 5 programs
● STEP 7 overall index
● Manual CPU 317-2DP
13.16.1.3
Relevant SINUMERIK documents
References:
● Commissioning Manual IBN CNC: NCK, PLC, Drive
● Operator Components and Networking Manual
● Function Manual Basic Functions
● Function Manual, Extended Functions:
● Function Manual, Special Functions
902
These packages can be ordered from the SIMATIC sales department.
Note
More information about possible functions can be found in SIMATIC catalogs and STEP
7 documentation.
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions