Pi Service: Tmcrto - Siemens SINUMERIK 840D sl Function Manual

IF semaphore == FREE
THEN
ELSE // Semaphore is blocked
necessary"
ENDIF
Description of formal parameters
Signal
PIService:
Unit:
WVar1:
WVar2:
1)
13.17.4.22

PI service: TMCRTO

Function: Create tool
Creation of a tool by specifying a name, a duplo number, e.g. with $TC_TP1[y] = Duplo number
or $TC_TP2[y] = "Tool name". Or optionally using a T number, e.g. with y = T number
The tool is entered in the TV area (tool directory) as available.
The first cutting edge "D1" (with zero content) is created in the TO block for corrections.
The first cutting edge "D1" (with zero content) is created in the TS block for monitoring data.
In the TUE block, if it is available, the cutting edge "D1" is created for the OEM cutting edge
data.
The TD block contains identifiers, duplo numbers, and the number of cutting edges (=1) for
the T number that is optionally specified or assigned by the NC.
If a TU block exists, it will contain the data block for the tool.
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
...
Set bit memory for "Function could not be executed, repeat
Type
ANY
INT
INT
WORD
Number
1
2
3
4
5
6
7 ... 10
P3: Basic PLC program for SINUMERIK 840D sl
Value range Description
"PI".MMCSEM Edit semaphore
1, 2, 3 ... 10 Channel
PI service-specific number of the semaphore
1)
0, 1 Job type
0: Reset semaphore
1: Test and set semaphore
PI service
TMCRTO (create tool)
TMFDPL (search for empty location for loading)
TMMVTL (prepare magazine location for loading, unload tool)
TMFPBP (search for location)
TMGETT (search for tool number)
TSEARC (search for tool)
Freely usable
13.17 Block descriptions
951