Siemens SINUMERIK 840D sl Function Manual page 908

P3: Basic PLC program for SINUMERIK 840D sl
13.16 Basic conditions and NC VAR selector
"Save" stores the variable list under a path, which is already specified. If the project path is
not known, then the procedure is as for "Save As....".
"Save As..." displays a window in which the path for the project to be stored can be specified.
Printing a project
The "Print" command under the "Project" menu item can be selected to print a project file. The
number of lines per page is selected under the "Print Setting" menu item. The default setting
is 77 lines.
Edit menu item
The following operator actions are examples of those, which can be carried out directly with
this menu item:
● Transfer variables
● Delete variables
● change alias names
● Find variables
These actions can also be canceled again under Edit.
Undoing actions
Operator actions relating to the creation of the project file (transfer variables, delete variables,
change alias names) can be undone in this menu.
NC variables menu item
The basic list of all variables is saved in NC Var Selector path Data\Swxy (xy stands for
software version no., e.g. SW 5.3:=xy=53). This list can be selected as an NC variables list.
In case of SINUMERIK 840D sl the basic lists are present in the path Data\Swxy_sl.
908
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions