Setting parameters
Use the engineering tool to set the parameters.
Engineering tool settings
■RJ71EIP91 (client) settings
Connect the engineering tool to the scanner-side CPU module and set the parameters.
1.
Set the CPU module as follows.
[Project]
[New]
2.
Click the [Setting Change] button to use the module label.
3.
Click the [OK] button to add the module labels of the CPU module.
4.
Set the RJ71EIP91 as follows.
[Navigation window]
[Parameter]
[Module Information]
Right-click
[Add New Module]
4.1 Program Example of UCMM Message Communications
4 PROGRAMMING
99
4