Mitsubishi Electric MELSEC iQ-R Series User Manual page 57

Network
Perform operations such as detecting EtherNet/IP devices on the network to add them to the network configuration settings
and configuring the settings for EtherNet/IP communications.
This item can be selected when EtherNet/IP Configuration Tool is switched to the online state and "Network Detection" is
displayed. ( Page 49 Window Structure)
Item
Choose Network Adapter
Read Network Configuration
Online Action
Insert in Configuration
Insert and Replace All
Properties
*1 This action can be performed when an EtherNet/IP device to which a module can be mounted is selected in "Network Detection". (
Page 49 Window Structure)
■"Choose Network Adapter" window
Select the network adapter to use in EtherNet/IP communications from the list of network adapters detected with EtherNet/IP
Configuration Tool.
When the "Automatic" check box is selected, all the detected network adapters are used in EtherNet/IP communications.
[Network] [Choose Network Adapter]
Item
IP Address
Adapter Name
Description
Opens the "Choose Network Adapter" window. ( Page 55 "Choose Network Adapter" window)
Scans the network to detect EtherNet/IP devices on the "Network Detection" tab. ( Page 60 Detecting the
RJ71EIP91 and EtherNet/IP devices)
Opens the "Online Action" window. ( Page 62 "Online Action" window)
Adds the selected EtherNet/IP device to the network configuration settings. ( Page 96 Configuring settings online)
Deletes all the EtherNet/IP devices set in the network configuration settings and adds all the EtherNet/IP devices
detected by "Network Detection".
Opens the properties of the selected EtherNet/IP device. ( Page 61 EtherNet/IP device properties)
Description
Displays the IP address of the network adapter.
Displays the name of the network adapter.
*1
3 EtherNet/IP Configuration Tool
3.1 Window Structure
3
55