Mitsubishi Electric MELSEC iQ-R Series User Manual page 27

Setting method
For Class1 instance communications, set the originator and target on the RJ71EIP91 on the scanner side.
■Originator (on scanner side) settings
Under "Basic Setting" in the engineering tool, set the IP address, subnet mask, and default gateway of the RJ71EIP91.
[Navigation window]
For details on the setting window, refer to the following.
Page 44 Basic Setting
■Target (on adapter side) settings
After registering the EtherNet/IP device with EtherNet/IP Configuration Tool, set the adapter side for each connection.
For details on registering EtherNet/IP devices, refer to the following.
Page 94 Procedure for Registering EtherNet/IP Devices
Select the EtherNet/IP device in the network configuration settings
(1) Input data size
(2) Trigger type
(3) RPI
(4) Output data size
(5) RPI
For details on the setting window, refer to the following.
Page 79 [Connections] tab
[Parameter] [Module Information] [RJ71EIP91] [Basic Setting]
[Device] [Properties]
(1)
(2)
(3)
(4)
(5)
1.1 EtherNet/IP Communication Functions
[Connections] tab
1 FUNCTIONS
25
1