5.
Set the items in "Basic Setting" as follows.
[Navigation window]
6.
Write the set parameters to the CPU module. Then reset the CPU module or turn the system off and on.
[Online]
[Write to PLC]
■RJ71EIP91 (server) settings
Connect the engineering tool to the adapter-side CPU module and set the parameters.
1.
Set the CPU module as follows.
[Project]
[New]
2.
Click the [Setting Change] button to use the module label.
3.
Click the [OK] button to add the module labels of the CPU module.
4 PROGRAMMING
100
4.1 Program Example of UCMM Message Communications
[Parameter]
[Module Information]
[RJ71EIP91]
[Basic Setting]