ABB UniGear Series Engineering Manual page 109

Rev. Page Change Description
A all Initial release
B all New switchgear types for UniGear Digital (UniGear ZS1 24kV, UniGear
550, UniGear 500R, UniGear MCC)
3D models of switchgear panels
Extended sensor product portfolio for UniGear Digital
Engineering of sensors including setting examples
Updated recommended network topologies (HSR networks with
redboxes, HSR-PRP networks)
Updated recommended time synchronization schemes (HSR-PRP net-
works)
HSR and IEEE1588 v2 support in AFS 66x
C all 615 series 5.0 FP1 (new functionality: for example, IEC 61850 Edition 2
support, synchro check function with IEC 61850-9-2LE, RED615 sup-
ports HSR, PRP and IEC61850-9-2LE)
Connecting GOOSE sender data to a protection relay application in
PCM600
Application configuration of the SMV receiver
Protection relay Ethernet rear ports setting and supervision
Updated engineering of current sensors (RSV up to 150 mV/Hz)
Small form-factor pluggable module / port
Recommended Satellite controlled clocks and their engineering
Updated recommended network topologies (Fast Media redundancy
protocol)
D all Ethernet technology extended about Ethernet rear connections of
protection relays
620 series 2.0 FP1 (new functionality: for example, IEC 61850 Edition 2
support, synchro check function with IEC 61850-9-2LE, REM620 sup-
ports sensor inputs)
Testing section has moved to UniGear Digital Commissioning and
testing Guide
Updated figures with UniGear ZS1 Digital (17.5 kV, 4 000 A, 50 kA) –
a new post insulator support
Automatic port configuration in Ethernet switch for connected protec-
tion relays via metal cabling
Ethernet channel supervision function blocks (RCHLCCH and
SCHLCCH)
Coupler adapter AR5 – three phases adapter
ESSAILEC
Removal of SNTP-> IEEE1588 Time synchronization scheme (It is not
optimal solution for UniGear Digital)
® test block
Revision History
Date / Initial
2014
2015-01-16
2015-12-01
2017 -01-02