Advertisement
Step 2.
• Connect Wires (41) with Handle Bar Wires (36A) from Handle Bar Frame
(5). Do not pinch Wires (41 & 36A).
• Install Handle Bar Frame (3) onto the console masts using Bolts (131),
Split Washers (130) and Flat Washers (166). Do not tighten before
putting the console on.
• Connect Wires (40) from Lower Console Assembly (3) with Handle Bar
Wires (36A).
• Install Lower Console Assembly (3) onto Handle Bar Frame (3) using
Bolts (167), Split Washers (130) and Flat Washers (166). Do not tighten
before putting the console on.
Hardware for step 2
Part
Type
130
Split washer
131
Bolt
166
Flat washer
167
Bolt
131
130
166
33
Description
Ø10 × 2.0T
M8 × 45mm
Ø8.5 × Ø16 × 1.5T
M8 × 50mm
3
131
130
166
5
40
36(B)
36(A)
41
166
130
166
130
34
167
141
12
Qty
6
4
6
2
Advertisement
