Safety Precautions ---Electrical Requirements; Product Features - Sharp SWD-77EH-BK Quick Start Manual

Top and bottom load water dispenser
Table of Contents

Advertisement

SAFETY PRECAUTIONS ---Electrical Requirements

WARNING
Electrical shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
A 120 volt, 60 Hz., AC only, 15 amp, fused electrical supply is required. A time-delay fuse or
circuit breaker is recommended.
If codes permit and a separate ground wire is used, it is recommended that a qualified
electrician determine that the ground path is adequate.
Check with a qualified electrician if you are not sure if the water cooler is properly grounded.
Proprietary design of the hot water tank assures availability of hot water and efficient energy
use.

PRODUCT FEATURES

Congratulations! You have chosen an Advanced Technology State of the Art Water
Cooler.
The refrigeration system on this cooler cools the cold water by internal evaporator of commer-
cial design flat forms the ice around it. This feature is called an "Ice Bank". It allows for ice
cold water and keeps the water temperature consistently cold, however a Longer time in
forming the Ice Bank is required. Since ice is an insulator, the more ice is built up, the slower
next layer is made.
WHEN UNIT IS PLUGGED IN FOR THE FIRST TIME WAIT FOR UP TO 6 HOURS FOR
COLD WATER TEMPERATURES TO REACH THE COLDEST SETTINGS.
4

Advertisement

Table of Contents
loading

Table of Contents