HUAWEI TP3106-70&TP3206-55 Telepresence V100R002
Quick Start Guide
The Huawei TP3106-70 and TP3206-55 telepresence systems (telepresence systems for
short) use a touch panel to control conferences. For more information, visit
http://support.huawei.com/enterprise
Telepresence V100R002 User Guide.
Powering On and Waking Up
1.On the touch panel, press and hold
the power button for 2 seconds or
more.
2. Drag
to
The telepresence system home screen
is displayed, as shown in the
following figure.
If the telepresence system is not
started, tap
, and select Power On
All to power on all devices.
To power off all devices, tap
and select Power Off All.
Joining a Conference
Using the One Tap to Join Conference Function
If the conference has been scheduled, from the conference schedules list on the home screen,
select the conference and tap
Using the Unified Access Number
If the telepresence system supports the Passcode function and the service management center
sends you Access code and Meeting Passcode for a conference, you can quickly join the
conference on the home screen.
to obtain the HUAWEI TP3106-70&TP3206-55
.
.
indicates that the conference is
ongoing, but your site is absent from
the conference.
indicates that the conference has
not yet started.
Tap
to refresh the conference
schedules list.
On the home screen, enter Access
code and Meeting Passcode and tap
.