Handling And Operation; Pairing The Speaker With A Bluetooth ® Device - Silvercrest SLXL 20 A1 Operating Instructions And Safety Instructions

Handling and operation

Pairing the speaker with a Bluetooth
NOTE
If you want to pair the loudspeaker with a Bluetooth
►
jack socket
When using the device for the first time, proceed as follows:
Ensure that the speaker is switched off and the Bluetooth
♦
switched on .
Set the Bluetooth
♦
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
♦ Press and hold the
You will immediately hear a rising sequence of beeps and the operating/
charging LED
and the operating/charging LED
The Bluetooth
♦ Select the entry
Blue tooth
devices . You will hear a beep and the operating/charging LED
blue every 3 seconds once the connection has been successfully established .
Start playback on the Bluetooth
♦
♦ Press and hold the
and deactivate the Bluetooth
of beeps . The operating/charging LED
simultaneously and then goes out .
■ 30 │ GB │ IE
may not be occupied .
device so that it scans for other Bluetooth
®
®
button for about 3 seconds to turn the speaker on .
flashes blue and orange twice . Then you will hear a beep
® function is now activated automatically .
from the list of found devices on your
® device and, if required, enter the code
button for about 3 seconds to turn the speaker off
®
device
®
device .
flashes alternatively orange und blue .
® device .
function . You will hear a descending series
flashes blue and orange twice
® device, the 3 .5 mm
® device is
® devices .
to connect the two
flashes
SLXL 20 A1