Tws Mode - Silvercrest SLXL 20 A1 Operating Instructions And Safety Instructions

TWS mode

If you purchase a second loudspeaker of the same type
(IAN 313951), it is possible to connect both loudspeakers and use them
as a stereo loudspeaker system . A second loudspeaker can be purchased
at www .kompernass .com .
The TWS ("True Wireless Stereo") function allows two speakers to be connected
to each other .
The left speaker is thus the main speaker which is always connected to a
Bluetooth
Bluetooth
Activate TWS mode
NOTE
Do not activate TWS mode if there is a Bluetooth
►
a speaker and a Bluetooth
♦ Switch on both speakers .
♦ Briefly press the
left speaker . You will hear a beep and the TWS LED
during pairing .
♦ Press the button
♦ If the pairing of the two speakers has been successful, you will hear a short
beep . TWS mode is activated .
♦ The TWS LED
♦ The TWS LED
Pair the left speaker with a Bluetooth
♦
Start playback on the Bluetooth
♦
NOTE
► If you do not pair the two speakers within 6 minutes, the speakers will turn
off automatically . In this case, you will have to switch the speakers back on
again before restarting the pairing process .
► Make sure you position the left and right speakers correctly for playback .
► The playback buttons work on both speakers .
■ 32 │ GB │ IE
® device . This speaker transmits the sound coming from the
® device to the right speaker .
button
on the second speaker briefly .
on the left speaker lights up green .
on the right speaker flashes green .
® device .
on the first speaker that you want to use as the
® device .
® device .
® connection between
flashes green rapidly
SLXL 20 A1