Static Routes - Siemens SCALANCE W1780 Configuration Manual

● TIA Interface
Select whether this interface should become the TIA interface. The TIA interface defines on
which VLAN the PROFINET functionalities are available. This mainly affects the device
search with or via DCP.
● MTU
MTU (Maximum Transmission Unit) specifies the maximum size of the packet. If packets are
longer than the set MTU, they are fragmented. The MTU covers the IP headers and the
headers of the higher layers.
Range of values:
– With IPv4: 90 ... 1514
– With IPv6: 1280 ... 1514
Procedure
1. Select the interface from the "Interface (Name)" drop-down list.
2. Enter a name for the Interface in "Interface Name".
3. Enter the IPv4 address of the subnet in the "IP Address" column.
4. Enter the subnet mask belonging to the IPv4 address in the "Subnet Mask" column
5. Click the "Set Values" button.
6.8.2

Static Routes

On this page, you specify the routes via which data exchange can take place between the
various subnets. Dynamic routing protocols are not supported, for example RIP, OSPF.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Configuring with Web Based Management
6.8 Menu "Layer 3 (IPv4)"
287