Siemens SCALANCE W1780 Configuration Manual page 316

Configuring with Web Based Management
6.10 "Security" menu
● within own VAP
– Enabled
– Disabled
● with other VAPs
– Enabled
– Disabled
Note
"within own VAP" or "with other VAPs" function disabled
If the "within own VAP" or "with other VAPs" function is disabled the various WLAN clients
can no longer see each other. This means that Address Collision Detection (ACD) also no
longer works reliably.
● with Ethernet
– Enabled
– Disabled
● Client Limiter
– Enabled
– Disabled
● Max. Clients
Set the maximum number of clients that can connect to this interface at the same time. If the
number is exceeded, additional clients are rejected.
316
Clients logged on to the same VAP interface of an access point can communicate with
each other.
Option is disabled.
Clients logged on to different VAP interfaces of an access point can communicate with
each other.
Note
For an access point, "with other VAPs" needs to be enabled on all WLAN interfaces or
on all VAP interfaces to allow communication between clients logged on at different VAP
interfaces of the access point.
Option is disabled.
Clients can communicate via the Ethernet interface of the access point.
Option is disabled.
The number of WLAN clients that can be logged on simultaneously is limited.
Option is disabled.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03