Panasonic TH-86CQ1U Operating Instructions Manual page 16

1. Attach the clamper
Note
● Wipe off dirt, such as dust, water and oil on the
attachment surface, and affix the clamper on the
attachment surface by pushing it firmly.
●
Once the clamper is affixed, it cannot be reused. Be
sure to confirm the attaching position before affixing
it.
Remove the tape at the back, and affix the clamper on
the flat surface.
2. Bundle the cables
To loosen:
Remove the band from the knob, and pull out the band
tip.
16
English
Attachment
surface
hooks
knob