Basic Controls - Panasonic TH-86CQ1U Operating Instructions Manual

Basic Controls

<Power button ( ) (Unit)>
(Back of the unit)
86-inch model
75-inch model
65-inch model
65-inch model
55-inch model
50-inch model
43-inch model
Remote Control Sensor /
Power Indicator
Operate pointing the remote control directly at the unit's
Remote Control Sensor.
26
English
55-inch model
50-inch model
AC cord
43-inch model
(supplied)
AC socket outlet
86-inch model
75-inch model
Note
● Do not put an obstacle between the remote control
sensor of the main unit and the remote control.
● Operate the remote control in front of the remote
control sensor or from the area where the sensor can
be seen.
● When directly aiming the remote control at the remote
control sensor of the main unit, the distance from
the front of remote control sensor should be approx.
7 m or less. Depending on the angle, the operation
distance may be shorter.
●
Do not subject the remote control sensor of the main
unit to the direct sunlight or strong fluorescent light.
1
Connect the AC cord plug to the TV.
(see page 14)
2
Connect the plug to the socket outlet.
Note
● When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the
socket outlet first.
● The settings may not be saved if the power plug
is disconnected immediately after changing
settings with on-screen menu. Disconnect the
power plug after a enough period of time. Or,
disconnect the power plug after turning the
power off with the remote control, RS-232C
control or LAN control.
3
Press the <Power button ( )> on the
unit to turn the power of the unit on.
●
Power Indicator: Green (Picture is displayed.)
●
When the power of the unit is on, the power
indicator lights up and remote control operation is
possible.
●
When the power indicator is lit, it is not necessary
to press the <Power button ( ) (Unit)> on the
unit. Operate the remote control so that the power
indicator turns green (picture is displayed).