Panasonic TH-86CQ1U Operating Instructions Manual page 55

Symptoms
The Serial commands is
uncontrollable.
The LAN is uncontrollable.
LCD TV panel
Symptoms
It takes a while for the picture to
appear.
The edges of the images flicker.
There may be always-lighting dots
or non-lighting dots appear on the
screen.
Image retention appears
This TV uses special image processing. Hence a slight time lag may occur between image and audio, depending on
the type of input signal. However, this is not a malfunction.
Check that [SERIAL IN/LAN select] is selected [SERIAL IN]. (see page 37)
Check whether the connection has been made properly.
(see page 20)
Check that [SERIAL IN/LAN select] is selected [LAN]. (see page 37)
Check that the connection has been made properly.
(see page 44)
Check that [LAN setup] is set properly.
(see page 37)
The unit digitally processes the various signals in order to reproduce
esthetically pleasing images. As such, it sometimes takes a few moments
for the picture to appear when the power has been turned on, when the
input has been switched.
Due to the characteristics of the system used to drive the liquid crystal
panel, the edges may appear to flicker in the fast-moving parts of the
images: This is normal and not indicative of malfunctioning.
This is a characteristic of liquid crystal panels and is not a problem.
Image retention may occur. If you display a still picture for an extended
period, the image might remain on the screen. However, it will disappear
when a general moving picture is displayed for a while. This is not
considered as malfunction.
Check
Check
55
English