Panasonic TH-86CQ1U Operating Instructions Manual page 53

*1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*2: Signals to represent formats are as follows.
R : D-sub RGB (PC IN)
H : HDMI (HDMI 1, HDMI 2)
*3: Based on VESA CVT-RB (Reduced Blanking) standard
*4: S ignals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended Display
Identification Data) of this unit.
For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PC
side even if this unit supports those signals.
Note
●
An auto detected signal format may be differently displayed from the actual input signal.
●
[ i ] shown after the number of dots of resolution means the interlace signal.
53
English