Rexroth IndraDrive
7.5
Connecting Cables and Rails
Connections (Power Section)
A
B
1
No.
Designation
A
UPS (uninterruptible power system)
B
24 V control voltage supply
C
Supply unit
D
Drive controller
1
PE connection of mains supply
2
Mains connection
3
PE connection to drive controller;
If cables are used for ground connection they must have a cross section of at least 10 mm
4
Module bus X1
5
Control voltage connection (+24V, 0V);
If connection with contact isn't possible you can also use wires.
6
DC bus connection (L+, L-);
If connection with contact isn't possible you can also use wires.
DOK-INDRV*-HMV-*******-PR01-EN-P
Overview
C
2
Fig. 7-7:
Connections - overview
D
3
installation_hmv_system.fh7
7-11
Electrical Installation
4
5
6
2
.