X1, Bus Module - Bosch Rexroth IndraDrive HMV01.1E-W0030 Project Planning Manual

Rexroth IndraDrive

X1, Bus Module

Graphic Representation
DOK-INDRV*-HMV-*******-PR01-EN-P
The bus module permits data exchange between the supply unit and the
drive controllers.
Fig. 7-15: X1
Design
Type
Flat line connector
Fig. 7-16: Design
Note: If extension leads are used the leads must be shielded. Their
total length must not exceed a maximum of 40 m.
Electrical Installation
X1_hmv
Number of Type of design
poles
8 Connector on device
7-21