Mounting - Bosch Rexroth IndraDrive HMV01.1E-W0030 Project Planning Manual

7-32
Electrical Installation

Mounting

Tightening Torque
• At the first and last drive controller in a line of devices connected to
each other there mustn't any cutout be broken off at the outer side of
the touch guard.
The touch guard must always be mounted following connection work.
Fig. 7-41: Touch guard
Note: Risk of damage to the touch guard!
The maximum tightening torque for the fixing screw for the
touch guard is 2.8 Nm.
2.8 Nm
Rexroth IndraDrive
hmv_beruehrschutz
DOK-INDRV*-HMV-*******-PR01-EN-P