Safety Information - Silvercrest SBHS 50 B1 Operating Instructions Manual

Safety information

RISK oF eLeCTRIC SHoCK
Connect the appliance only to a correctly installed mains
►
power socket supplying a mains voltage of 220 - 240 V ~ ,
50/60 Hz .
Arrange for defective power plugs and/or cables to be
►
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury .
Remove the plug from the mains power socket in case of
►
operating malfunctions and before you clean the appliance .
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself .
Do not kink or crush the power cable, and route the cable so
►
that it cannot be stepped on or tripped over .
Make sure that the power cable does not become wet or
►
moist during use . Route the cable in such a way that it can-
not be crushed or damaged .
To prevent risks, stop using the appliance immediately if it is
►
damaged .
Do not wrap the power cable around the appliance, and
►
protect it from being damaged .
Do not use extension cables – they will make it difficult to
►
disconnect the appliance quickly in an emergency .
Never touch the appliance, the power cable or the power
►
plug with wet hands .
Never submerge the appliance in liquids or never allow
►
liquids to penetrate the appliance housing . Do not expose
the appliance to humidity and do not use it outdoors . If any
liquid gets into the housing, disconnect the appliance from
the mains power socket immediately and have it repaired by
a qualified technician .
■ 4 GB │ IE │ NI
│
SBHS 50 B1