The following figure shows the position of the interfaces.
①
②
③
④
Connecting cables
Note
Use copper cables on connectors with terminal connections
Use copper (Cu) cables for all supply lines that are connected to the device with terminals,
e.g. 24 V DC power supply cables on the 24 V DC power supply connector.
Use only shielded standard cables as data connecting cables, order information is available
on the Internet Industry Mall (https://mall.industry.siemens.com).
Note
External interface cable
Lay external interface cables only indoors or up to a maximum length of 42.6 m outdoors.
IFP1900 INOX PRO
Compact Operating Instructions, 07/2019, A5E35751632-AC
Connection for the 24 V DC power supply
Ethernet interface
Reset button
DisplayPort interface
3.2 Mounting and connecting the device
⑤
USB 2.0 interfaces, high current
⑥
USB type B interface
⑦
Connection for protective conductor
⑧
Internal terminal strip, 20-pin
(only for devices with operator controls)
Installing the device
15