Commissioning The Device - Siemens IFP1900 INOX PRO Compact Operating Instructions

Commissioning the device

If you operate the device exclusively as monitor and do not change the brightness, you do
not need to commission the device. To use advanced functions of the device, perform the
following commissioning.
Requirement
● The device is mounted according to the Quick Install Guide.
● The device is connected according to the Quick Install Guide.
Note
The supplied connecting cables are only intended for commissioning and not for
continuous operation.
● DVD "Documentation and Drivers" or USB stick with a copy of the DVD
Procedure
1. Switch on the IPC.
2. Switch on the power supply of the IFP1900 INOX PRO.
3. Insert the "Documentation and Drivers" DVD into the CD/DVD drive of the IPC.
Alternatively, insert the USB stick with the copy of the DVD into a USB port on the device.
4. Follow the instructions for installation.
IFP1900 INOX PRO
Compact Operating Instructions, 07/2019, A5E35751632-AC
4
19