Safety Instructions; Intended Use; General Safety Instructions - Siemens IFP1900 INOX PRO Compact Operating Instructions

Safety instructions

2.1

Intended use

The IFP1900 INOX PRO touch screen front panel devices are designed to be used for high-
performance visualization tasks (operator control and monitoring) and in ambient conditions
such as those found in the food, beverage and pharmaceutical industries.
Improper use can endanger safety.
Improper use of the device endangers safety and can result in personal injury or damage to
property.
Any use deviating from the intended use is not permitted.
Operate the device only in accordance with its intended use.
Also see the information in the section "Cleaning the device (Page 20)".
Particular attention has been paid during design of the HMI devices to ensure that the front
panel is easy to clean and can be disinfected when needed. The devices with stainless steel
front have therefore been developed according to DIN EN 1672-2 "Food Processing
Machinery - Safety and Hygiene Requirements".
2.2

General safety instructions

Performing a function test when installing the device in machines or systems
Following the results of a risk analysis, additional protection equipment on the machine or
the system is necessary to avoid endangering persons. In particular, the programming,
parameter assignment and wiring of the inserted I/O must be executed in accordance with
the safety performance identified by the necessary risk analysis (SIL, PL or Cat.). The
intended use of the device has to be ensured.
The proper use of the device has to be verified with a function test on the system. These
tests help you to identify programming, parameter assignment and wiring errors. The test
results have to be recorded and, if necessary, entered into the safety verification
documents.
IFP1900 INOX PRO
Compact Operating Instructions, 07/2019, A5E35751632-AC
WARNING
WARNING
2
9