3. MAINTENANCE
3.1.2 Platen/Sensors
3.1.3 Cover
CAUTION!
Do not use any volatile
solvents including thinner and
benzene, as this may cause
discoloration or distortion of
the cover.
3.1.4 Media Housing
1. Wipe the Platen with a soft cloth moistened with absolute ethyl
alcohol.
2. Remove dust or paper particles from wipe the Black Mark Sensor,
Feed Gap Sensor, and Cover Open Sensor with a dry soft cloth.
Cover Open Sensor
Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth
slightly moistened with mild detergent solution.
Wipe the media housing with a dry soft cloth. Wipe off dirt with a soft
cloth slightly moistened with mild detergent solution.
E3- 2
ENGLISH VERSION EO1-33088
Feed Gap Sensor
Platen
3.1 Cleaning
Black Mark Sensor