A1.3.3 Detection Area Of The Reflective Sensor; A1.3.4 Effective Print Area - Toshiba B-EV4D SERIES Owner's Manual

APPENDIX 1 SPECIFICATIONS

A1.3.3 Detection Area of the Reflective Sensor

The Reflective Sensor is movable within the full range of the media width.
The reflection factor of the Black Mark must be 10% or lower with a waveform length of 950 nm.
The Reflective Sensor should be aligned with the centre of the Black Mark.
<Black Mark>
Sensor should be positioned at the
centre of the black mark.
Min. 2 mm

A1.3.4 Effective Print Area

The figure below illustrates the relation between the head effective print width and media width.
(for GS14 Type)
Out of print range
(for TS14 Type)
Out of print range
Min. 8 mm
Print head element
108.0 mm±0.2mm
2 mm
(Head Effective Print Range)
112.0 mm (Max. media width)
Print head element
106.0 mm±0.2mm
3 mm
(Head Effective Print Range)
112.0 mm (Max. media width)
EA1- 5
Sensor is movable within the full range.
2 mm
3 mm
ENGLISH VERSION EO1-33088
Detecting the black marks on the
back.
Media feed direction
Out of print range
Out of print range
A1.3 Media