Interrupting the alarm
SNOOZE
•
Press the
button to interrupt the alarm
for 10 minutes.
Set snooze time
MODE
•
Press the
button seven times; the screen
displays the snooze time set
(default is SNO10).
UP
DOWN
•
Use the
and
time to a time between 1 and 59 minutes.
Turning off the alarm function
VOL.+/AL–1
•
Press the
the relevant alarm symbols disappear from
the screen.
Stop watch function
The stop watch function is only available when the
radio is switched off.
•
Press and hold down the
2 seconds, the screen shows 00.00.0 U.
SNOOZE
•
Press
to start the stop watch. The maxi-
mum time for the stop watch is 99 minutes and
59 seconds. If the stop watch exceeds the maxi-
mum time, 99:59.0 is displayed and flashes.
•
During time measurement, it can be stopped by
SNOOZE
pressing
.
SNOOZE
•
Pressing
again restarts the stop watch.
SNOOZE
•
Hold down
•
Leave the stop watch by pressing
Countdown function
The countdown function is only available when
the radio is switched off.
buttons to set the snooze
VOL.–/AL–2
or
button until
PAGE
button for around
to reset the stop watch.
PAGE
.
Set and save countdown
•
Press and hold down the
for around 2 seconds, the screen shows
D 00.00.
UP
•
Press the
or
desired time.
5 countdown times are preset on the memory
buttons and you can open these directly using
the corresponding memory button:
M.0/5
Button
M.1/6
Button
M.2/7
Button
M.3/8
Button
M.4/9
Button
MEM
•
Press the
memory space indicator
screen. Now use the
select a memory space; when you press the
relevant memory key the time is saved in this
memory space and the time previously stored
there overwritten.
MEMORY SCAN
•
When the
you leave the countdown mode.
Call up and activate the countdown function
•
Press and hold down the
for around 2 seconds, the screen shows
D 00.00.
•
Select the desired, saved countdown time with
the aid of the
SNOOZE
•
Press
to start the countdown. Pressing
SNOOZE
the
button again pauses the countdown.
- 10 -
MEMORY SCAN
DOWN
button to set the
10:00
30:00
45:00
60:00
90:00
button to save the set time, the
MEM
flashes on the
M.0/5
M.4/9
–
buttons to
button is pressed again
MEMORY SCAN
M.0/5
M.4/9
–
memory buttons.
button
button