Multirate Optical Interfaces; Specification (1310 Nm Transmitter); Specification (1550 Nm Transmitter); Specification (Receiver) - HP 37718A Installation And Verification Manual

N OTE
Performance Tests

Multirate Optical Interfaces

Multirate Optical Interfaces
Specification (1310 nm Transmitter)
Wavelength
Power Output
Line Coding
Safety Class
Data Rates
Specification (1550 nm Transmitter)
Wavelength
Power Output
Line Coding
Safety Class
Data Rates
The Transmitter Wavelengths installed are dependent on HP 37718A/
37719A option.
Specification (Receiver)
Wavelength
Maximum Input Power
Line Coding
Sensitivity
PMP Electrical Input
PMP Impedance
3-82
1280 nm to 1330 nm (Typical 1310 nm)
+0.0 dBm to +3.0 dBm (Typical +1 dBm)
NRZ
Class 1, FDA 21 CFR Ch.1 1040.10 and EN 60825
51.84, 155.52, 622.08 or 2488.32 Mb/s (Nominal)
1530 nm to 1570 nm (Typical 1550 nm)
0.0 dBm to +3.0 dBm (Typical +1dBm)
NRZ
Class 1, FDA 21 CFR Ch.1 1040.10 and EN 60825
51.84, 155.52, 622.08 or 2488.32 Mb/s (Nominal)
1200 nm to 1600 nm
-8 dBm (for BER of 1.0E
NRZ
-34 dBm (STM-0/1/4, OC-1/3/12
-28 dBm Minimum (STM-16, OC-48)
(wavelength=1310/1550 nm, Modulation =
100%, Data=2
150mV pk-pk (Nominal) 51.84, 155.52 and
622.08 Mb/s only
Ω
Nominal 50
-10
)
23 -10
-1, BER=1.0E )