Table of Contents
Advertisement
6
4 2 3 4 6 0 0 A N D 4 2 3 4 6 0 1 | K AT H A R O M E T E R P O W E R S U P P LY U N I T S | I M/4 2 3 4 6 0 0 R E V. E
4 Mechanical installation
The PSU must be mounted in a clean, dry, well ventilated
position (on a wall or panel) in a safe area by means of the four
fixing lugs. Figure 2 gives dimensions and fixing details for the
unit.
Before commencing installation, ensure that the unit supplied
is suitable for the supply voltage available – see Specification
on page 5 and Figure 3.
Dimensions in mm (in)
Ensure a clearance of at least 100 mm (4 in)
at both ends of the unit for access to the
cable glands and to minimize cable bends.
Mains cable
entry
(1.2)
Figure 2 PSU dimensions
Figure 3 Typical identification labels and locations
20
20
(0.8)
(0.8)
170 (6.7)
30
110 (4.3)
between centers
An adaptor kit (part number 4234 519) is available for mounting the
4234 600/601 PSU in place of the 004235 000/01/02 PSU.
Output to
katharometer
Output to temperature control
circuit in katharometer only
All holes 7.0 diameter
Code
Serial No
Voltage
Watts
Year Manuf. .
Manufactured by :
A BB L i m i t e d
Oldends Lane, Stonehouse,
Glos. England GL10 3TA
All dimensions are nominal
mm (in) unless otherwise stated.
111 (4.4)
83 (3.3)
4234/600XX
230 V AC
N4006
3 (0.1)
Advertisement
Table of Contents
