Installation - NEC Express5800 Series User Manual

Chapter 2 Preparations

1.14.1 Installation

Install an optical disk drive in the following procedure.
(1) Express5800/R120e-1E (2.5-inch Drive Model)
1. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations..
2. Remove the two screws from the
optical disk drive tray, and pull the
tray out.
3. Remove a single screw from the tray
you have removed in Step 2, and
remove the bracket and dummy cover
of optical disk drive.
4. Install the optical disk drive to the
tray.
Note
Keep the removed screws and dummy cover for future use.
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
Screw
1
Catches
2
Screw holes
101