Chapter 2 Preparations
1.18.1 Installation
Install a Hard Disk Drive by using the following procedure.
1. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the slot where you install the Hard Disk Drive.
The server provides 4 slots. Install Hard Disk Drives in ascending port number order.
3. Remove the dummy trays.
4. Unlock the handle of the drive carrier.
116
Note
In the RAID System, build a Disk Array using Hard Disk Drives that have the same
specifications (capacity, rotational speed, and standard).
•
Important
Keep the dummy trays for future use.
•
Dummy trays are intended to increase the cooling effect inside the
server. Keep the dummy trays installed in slots where Hard Disk Drives
are not installed.
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices