Chapter 2 Preparations
1.18
3.5-inch Hard Disk Drive
The Express5800/R120e-1E (3.5-inch Drive Model) has 3.5-inch Drive Bays at the front of the server.
A Hard Disk Drive mounted in a dedicated drive carrier can be purchased. Install the Hard Disk Drive on the
server with it mounted in the drive carrier.
Note the following precautions to install hard disk drives.
•
For onboard connection, hard disk drives having different capacities, interface types, or rotational speeds
cannot be installed together.
•
To build a RAID system, you may need to set jumper switch or change cable connection.
Bays can contain up to 4 hard disk drives.
A unique port number is pre-assigned to each slot.
Port 0
Important
Use Hard Disk Drives specified by NEC. Installing a third-party Hard Disk
Drive might cause a failure of the server and the Hard Disk Drive.
Port 1
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
Port 2
Port 3
115