NEC Express5800 Series User Manual page 89

Chapter 2 Preparations
13. Insert the riser card into the slot on
motherboard.
When connecting the card, position
the terminal part of the card to the slot
on the motherboard and insert it.
14. Secure the card with two screws you removed in Step 7. Secure the RAID Controller bracket with a single
screw you have removed in Step 8.
15. Attach the duct which FBU is installed.
Important
When installing RAID Controller, be careful that cables (e.g., FBU control
cable and internal SAS/SATA cables) are not caught with the support bar. If
they are caught with support bar, RAID Controller might be damaged.
Support bar
Express5800/R120e-1E User's Guide
1. Installing Internal Optional Devices
89