Toshiba GL-1010 Network Fax Manual page 93

Term
Private print
Proof print
Property sheet
Property tab
Protocol stack
Raw Print Job
Recoverable error
Saddle stitch
Scheduled print
Sheet insertion
SNMP
GL-1010 Network Fax Operator's Guide
Definition of Common Terms
Private Print is a printing mode that allows users to send a job from their
workstation, and then hold it until the user enters a private DIN from the
copier to release and print the job.
Proof Print is a print mode that allows users to print only the first of a
multi-copy job and review it before releasing and printing the remaining
copies.
Property sheets contain attributes grouped categorically. For example, all
properties that are related to setting finishing options are grouped on the
GL-1010 drivers' Setup property page.
The Print Properties dialog box contains several tabs that allow users to
access property sheets, where options and settings are grouped by
category or function.
A collection of software that controls communication between devices.
Devices with the same protocol stack can communicate with each other.
A print job that is sent to the GL-1010 device by means other than the
GL-1010 printer driver. For example, using DOS commands to print
directly to the local port without using a printer driver. Raw print jobs also
result when users print to a GL-1010 using a different driver version or
type. For example, using a HP driver to print to a GL-1010.
An error condition that simply requires user intervention to resolve, for
example, paper out or paper jam.
Saddle stitching is a binding method whereby a booklet is stapled along
the center and folded.
Scheduled Print is a print mode that allows users to delay printing a
queued job until a specific date and time.
A feature where a blank page is printed in between a designated pages
with the original document. Insertion Sheet is stapled with the original
document (if stapling is requested). See also, Page Interleaving.
Simple Network Management Protocol. A widely used network
monitoring and control protocol. Data is passed from SNMP agents,
which are hardware and/or software processes reporting activity in each
network device (hub, router, bridge, etc.) to the workstation console used
to oversee the network. The agents return information contained in a MIB
(Management Information Base), which is a data structure that defines
what is obtainable from the device and what can be controlled.
Originating in the Unix community, SNMP has become widely used on all
major platforms.
Definition
93