Huawei iBAT 2.0-CIM01C2 User Manual page 19

iBAT 2.0-CIM01C2
User Manual
Indicator
ALM
PWR
Issue 07 (2019-01-02)
Color Meaning
Red Alarm indicator
Green Power indicator Steady
 If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.

If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.

If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
Copyright © Huawei Technologies Co., Ltd.
Status Description
Blinking Communication
at short fails. (No
intervals legitimate
northbound data
has been
received for 3
minutes.)
Steady The actual
on number of
online devices is
less than the
value of BIM
number.
Off The actual
number of
online devices
equals the value
of BIM number.
Board power
on indicator.
2 Overview
Measure
1. Check
whether the
communicatio
n cable is
loose.

If yes,
reconnect
the
communic
ation cable.
 If no, go to
the next
step.
2. Check
whether the
device is
malfunctionin
g.

If yes,
replace the
device.
 If no,
contact
Huawei
technical
support.
Check the value
of BIM number,
the BIM cable
connection, and
the BIM
indicators.
Requires no
handling.
Requires no
handling.
13