Siemens 7XV5655-0BB00 Manual page 14

Modem for transmission of serial data or protocols from devices with an rs232/rs485/fo interface via ethernet

Hide thumbs Also See for 7XV5655-0BB00:

Table of Contents

English

7XV5655-0BB00

INIT Button

The INIT button is for resetting the modem to its factory (default) settings and should only

be operated by technically qualified personnel.

It can be used to set a defined baudrate locally for service work. The default baudrate is

9600 8N1. The modem also outputs a reset string with the date and version number of the

firmware on its serial interface (RS232 / RS485 / FO).

This reset string can be read by a terminal program (e.g. HyperTerminal in Windows) on a

connected PC. The serial interface of the PC must be set to the default baudrate.

After you have operated the INIT button, the baudrate set at the communications partner

must also be adjusted, otherwise communication would no longer be possible.

You do not need to use the INIT button if you know the baudrate!

Operating the INIT button does not change any settings relevant to security such as IP

addresses or passwords!

14 / 77

C53000-G1176-C175-2

Table of Contents