Siemens 7XV5655-0BB00 Manual page 32

English
Using "HyperTerminal" via the Serial Interface of a PC
This terminal program is supplied as a standard part of the operating system, e.g.
WINDOWS® 98, WINDOWS® ME, WINDOWS® 2000 and WINDOWS® XP.
Start HyperTerminal under:
"Start Programs
Note: The Serial Modem can only be set via the serial interface in the currently set
baudrate and data format. If these settings were changed, the connection settings in
HyperTerminal would have to be adjusted.
It is advisable to note down these settings to avoid any problems accessing the
modem later.
32 / 77
Accessories Communications HyperTerminal"
Enter a name for the new
connection, e.g. . 9600 8N1.
The connection can be saved on
exiting.
Assign a PC interface to the
connection,
e.g. COM1.
For a new Serial Modem, select the settings
bits per second,
9600
data bits,
8
for parity,
none
stop bit and
1
for flow control
none
Continue with
OK
C53000-G1176-C175-2
7XV5655-0BB00