Siemens 7XV5655-0BB00 Manual page 28

English
Configuring the LAN Interface of the Operating PC
There are two ways of configuring the Serial Modem on a PC using the configuration tool
via its Ethernet interface:
Direct PC <–> modem LAN connection with "cross-over patch cable"
The modem is connected directly to the operating PC using a cross-over patch cable. The
LAN interface of the computer must be assigned a fixed IP address for this purpose.
Note: If the computer is operated in a company LAN, a variable IP address is usually
assigned by the server (see next section). If the Serial Modem is to be configured directly
via the cross-over cable with this computer, a fixed IP address must be assigned to this
computer for this time.
28 / 77
Select the appropriate "Local area
connection" under "Network connections".
In the "Local area connection status" window,
click the
"Properties"
button to switch to the local area connection
settings.
C53000-G1176-C175-2
7XV5655-0BB00