English
Add Device Manually
View Event Log
Properties
38 / 77
If the Serial Modem is connected behind a router, it is not
found automatically but must be added manually ("Add
Device manually"). This is done by entering its IP address
in the field. If the device can be accessed at this address, it
is put in the list.
Note: If the device is installed behind a router, the IP
address cannot be changed. This prevents the device from
being accessed unintentionally.
View current logfile (internal trace)
Type-specific configuration user interface
For more information, see the relevant sections.
7XV5655-0BB00
C53000-G1176-C175-2