Troubleshooting - Silvercrest SDR 1.5 A1 Operating Instructions And Safety Instructions

SilverCrest SDR 1.5 A1

10. Troubleshooting

The device does not switch on.
•
The inserted batteries may be empty, fit new batteries.
•
Test that the batteries are fitted with the correct polarity. Please note the
diagram in the battery compartment and on the batteries. See also the
chapter "Inserting the batteries".
•
If using a USB power adapter: Check that the USB power adapter is
correctly inserted into the mains socket. The USB cable (C) must also be
connected to your USB power adapter and the digital radio.
No radio reception, poor radio reception
•
Pull the telescopic aerial (12) all the way out and make sure it is orientated
correctly.
•
Tune in the station correctly. If necessary, start a new station search.
Device switched on but no sound
•
Check the volume setting.
•
While headphones are plugged in, the built-in speaker (1) is muted
automatically.
No alarm sound or alarm sound too low
•
Check the alarm sound volume in the alarm settings and, if necessary, set a
higher volume.
28 - English