2.
Connection Configuration
Remote Connections
The IPsec function is not supported for iSCSI interfaces.
Select a LAN switch with the IPsec function to use the IPsec function to perform a remote copy.
Connectable Models
The following table shows the models that can be connected with a remote copy, and the interfaces that can be
used.
Table 45 Connectable Models and Available Remote Interfaces
Connectable model (*1)
ETERNUS DX100 S4/DX200 S4
ETERNUS DX500 S4/DX600 S4
ETERNUS DX8100 S4/DX8900 S4
ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8100 S3/DX8700 S3/DX8900 S3
ETERNUS AF250 S2/AF650 S2
ETERNUS AF250/AF650
ETERNUS DX200F
ETERNUS DX90 S2
ETERNUS DX410 S2/DX440 S2
ETERNUS DX8100 S2/DX8700 S2
ETERNUS DX90
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700
*1: Firmware update may be required.
For information about firmware versions, contact your sales representative.
*2: This cannot be connected to a remote interface (iSCSI-RA) of the ETERNUS DX S2 series. Use a host inter-
face.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
Remote interface
FC
ETERNUS AF250 S2
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
´
´
´
134
iSCSI
ETERNUS AF250
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡
¡ (*2)
¡
¡ (*2)
¡
´
¡
´
¡
´
¡
P3AG-1822-09ENZ0