1.
Function
RAID Functions
RAID Functions
This section explains the points to note before configuring a system using the ETERNUS AF.
Supported RAID
The ETERNUS AF supports the following RAID levels.
RAID0 (striping)
•
RAID1 (mirroring)
•
•
RAID1+0 (striping of pairs of drives for mirroring)
RAID5 (striping with distributed parity)
•
RAID5+0 (double striping with distributed parity)
•
RAID6 (striping with double distributed parity)
•
RAID6-FR (provides the high speed rebuild function, and striping with double distributed parity)
•
Remember that a RAID0 configuration is not redundant. This means that if a RAID0 drive fails, the data will
not be recoverable.
This section explains the concepts and purposes (RAID level selection criteria) of the supported RAID levels.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
16
P3AG-1822-09ENZ0