Table of Contents
Advertisement
Maintenance and diagnostics
7
The NW8204 maintenance and diagnostic tool
50
Building Technologies
Fire Safety & Security Products
Setting date and time
NK Vitality
Opens a window, which shows the current status of the NK8237 point image.
NW8204 Vitality window
The window can be updated manually by pressing the Refresh button.
You can use it to check if status changes are sent correctly from NK8237 (for
example from the tamper switch).
Read DLL Version
Reads all subsystems configured. Displays a dialog box with a list of configured
subsystems organized by name, number, and creation date.
Read Kernel Version
Reads the version of the Linux kernel installed on NK8237 .
Read NK Version
Reads the version of the installed NK8237 firmware (NK8237.EXE).
Read NK Date Time
Reads current settings of date and time from the NK8237 RTC.
Read HW Conf. ID
Reads the HW Configuration ID from the unit. The HW Conf. ID is used to check
the HW Configuration from a remote location:
Serial: NKA8001-A1 or NKA8001-A2 serial port add-on board installed.
Read Memory
Displays the amount of RAM (in bytes) available on the NK8237.
Read Connected IP
Reads the IP address of the last host PC that was connected to the selected port.
Pressing this button causes the following dialog box to display:
A6V10403182_a_en
30.09.2014
Advertisement
Table of Contents
