Using Log Files - Siemens NK8237 MP4.70 Installation Function & Configuration Commissioning Safety Regulations

Firewall application for sinteso stt20 and cerberus pro fire detection systems
Table of Contents

Advertisement

Maintenance and diagnostics
7
The NW8204 maintenance and diagnostic tool
7.3.5
54
Building Technologies
Fire Safety & Security Products
3. Choose where you want to save the file(s) and select Save.
4. Select Close Connection.
If you do not close the connection, you will automatically be timed out in five
minutes.
Note: The diagnostic files can be sent to customer support for analysis. Once
analyzed, you will be instructed what to do to resolve your problem.

Using log files

NK8237 units can be configured by Composer to log data about network
communications on a mass storage device (SD card or USB mass storage device;
Network Connectivity Guide
see
NW8204 allows to upload the log data and to configure on the fly the logging
function.
Note: The unit is equipped with a 16 GB SD card.
Uploading log data
To upload the log data, do the following:
1. Click the Upload Log button.
2. Select the source media (Usb or SD) from the Media drop-down list in the
Source section.
3. In the Filtering Criteria section of the Upload Log window, select the filtering
criteria that fit your needs:
-
Period section: you can select a time frame (select the Enable criteria
check box to enable this criterion).
-
Category section: you can select the information categories you are
interested in (select the Enable criteria check box to enable this criterion).
-
Miscellaneous section: you can insert various specific data to be used as
filtering criteria. Note that in this section you can also filter the data
communication direction (Input, Output or All).
4. Choose log file location and name in the Output section, by using a Windows
standard select button (a TXT file will be created).
-
To split the data in several files, select the Split output file by size limit
(bytes) check box and insert the maximum bytes size for the log files to be
uploaded in the related field.
5. Click the Start Log Upload button to start the data upload.
 The upload starts and a progress bar shows the uploading speed.
, document no.A6V10359485). If that is the case,
A6V10403182_a_en
30.09.2014

Advertisement

Table of Contents
loading

Table of Contents