Table of Contents
Advertisement
Building Technologies
Fire Safety & Security Products
Configuring the log upload
Uploading log data
Note: If the data upload procedure seems to require a too long time to be
accomplished, you can abort the procedure by clicking the Abort Log Upload
button.
Note: The log file can be imported as CSV file in a spreadsheet application in
order to be analyzed by expert users (Technical Support).
Changing the active mass storage device on the fly
If two mass storage devices are available on your system (USB and SD card), you
can change on the fly the active storage device. Proceed as follows:
1. Right-click the inactive mass storage device you want to be active.
2. Select Set as Log storage.
The active mass storage device is represented by a floppy disk icon.
Maintenance and diagnostics
The NW8204 maintenance and diagnostic tool
7
55
A6V10403182_a_en
30.09.2014
Advertisement
Table of Contents
